326 Howell Street Dallas, Texas 75207

info@exdesigngroup.com   ●   (972) 360-6490


AirVolution Fans

AirVolution D – Model 370

The AirVolution D Model 370 is a six blade HVLS (High Volume, Low Speed) fan that is ideal for cooling smaller spaces with lower ceilings, typically 10 to 12 feet tall. It is an ideal choice for offices, restaurants, or building lobbies. As part of the Airvolution D series of MacroAir fans, the 370 features direct drive technology, ultra quiet operation and easy installation. See the full specifications below:

Available Diameters
6 – 12 ft.

HP
.25 hp

Hanging Weight
69 – 86 lbs.

RPM
66 - 151 rpm

Power Usage
.11 – .32 kW

CFM
18k – 54k cfm

Industry Spacing
28 - 48 ft.

Max Affected Area
1,300– 3,480 ft.²

Available in 110V – 220V +/- 5%.
Single Phase.

Fan, I Beam Mounting Hardware, Variable Speed Digital Touch Screen Controller, 100 ft. CAT5 Cable.

Model # Diameter HP Estimated Lead Time
MA12XS3706 12 ft / 3.66 m 0.25 HP / 0.186 kW 10 business days
MA10XS3706 10 ft / 3.05 m 0.25 HP / 0.186 kW 10 business days
MA08XS3706 8 ft / 2.44 m 0.25 HP / 0.186 kW 10 business days
MA06XS3706 6 ft / 1.83 m 0.25 HP / 0.186 kW 10 business days
Fuse Disconnect Switch -- -- 10 business days

 

Airvolution 370 - EX Design Group

Standard Features:

  • Clearcoat anodized airfoil blades
  • Forward, reverse, variable speed
  • Wash Down Duty rated, IP65 for indoor and outdoor use
  • On-board AirBrain optimizes motor control
  • Integrates into HVAC and other automated building systems via gateway
  • Digital wall controller with fault code access (NEMA 4X rated analog remote available as a substitution upon request)
  • 50,000-hour warranty (operating hours)
  • Safety Components: Safety Cable, Rapid Mount Commercial

Please select the voltage range from the following choices:

  • 110V +/-5% Single Phase • 220V +/-5% Single Phase

Please select the mounting kit provided from the following choices:

  • Rapid Mount Commercial I-beam or Glulam Mounting Kit*
  • Standard Mount I-beam or Glulam Mounting Kit*

*Please note that the I-beam Mounting Kit is included if nothing else is specified Additional options available include extended drop length tubes, powder coating and multi-fan controller.

Print Print | Sitemap
© 2018 Ex Design Group - A Division of Timber Blinds

Site maintained by Seafoam Media

Web ViewMobile View